Home > Refractory Bricks

Refractory Bricks

products +

$Refractory Bricks$

Refractory Bricks

Refractory Bricks
Refractory brick is a special building material, white, light yellow or brown, which can withstand high temperature of 1,580℃-1,770℃. It is widely used in Industrial kilns, various high temperature furnaces, etc. And has the characteristics of high temperature resistance, corrosion resistance, wear resistance, good thermal insulation performance and chemical stability.
Magnesia Brick

Magnesia Brick
Magnesia brick is an alkaline refractory material with magnesia content above 90% and periclase as the main crystal phase. Magnesia brick is a refractory brick made of fused magnesia and sintered magnesia at high temperature. Magnesia bricks have high refractoriness, good resistance to alkaline slag, high load softening temperature, but poor thermal shock resistance.
Magnesia Chrome Bricks

Magnesia Chrome Bricks
Magnesia chrome bricks properties
High refractoriness and refractoriness under load.
Good resistance to the corrosion of glass liquid, molten steel and slag.
Good thermal shock resistance and spalling resistance.
Good mechanical strength, low creep rate.
Good volume stability.
Magnesia Carbon Bricks

Magnesia Carbon Bricks
Impurities such as B2O3, SiO2 and so on are lower than standards.
High purity flake graphite(C≥96%) is adopted, so corrosion resistance, spalling resistance, high temperature strength, anti-oxidization property of magnesia bricks are greatly improved.
Antioxidants, such as Al, Si, SiC, Al-Mg and so on are added into raw material to avoid the decarburization of graphite.
RS brand magnesia carbon bricks adopt phenolic resign as binder, because it has high residual carbon rate, good adhesion ability to magnesia and graphite and good workability at room temperature.
Silica Bricks

Silica Bricks
1. High purity raw materials, low impurity content.

2. Strict production craft control.

3. True density is below 2.35g/cm3, small residual expansion rate.

4. Various species of silica bricks can be customized.
Magnesia Iron Spinel Bricks

Magnesia Iron Spinel Bricks
1.Good flexibility,
2.Thermal shock stability,
3.High volume stability,
4.High load softening temperature,
5.High melting point,
6.High erosion resistance.
Fused Cast Mullite Bricks

Fused Cast Mullite Bricks
Excellent thermal shock resistance, can resist drastic temperature change.
Excellent abrasion resistance, is suitable for high temperature wearing parts.
Excellent permeation and chemical corrosion resistance.
Low thermal expansion rate, masonry has good structural stability.
High hot mechanical strength, can support large load.
Fused AZS Bricks

Fused AZS Bricks
High refractoriness and high refractoriness under load.
Good resistance to glass liquid corrosion.
Good thermal stability.
Wearing resistant and washing-out resistant.
Long service life.
Fused Corundum Bricks

Fused Corundum Bricks
Brick Standard Size: 240*115*90
Refractoriness :≥1900 ℃
Bulk Density (g/cm3)：≥3.15
Apparent Porosity %：≤17
Cold Crushing Strength (Mpa)：≥100
0.2Mpa Refractoriness Under Load T0.6 ℃:≥1700
Acid proof brick

Acid proof brick
1.Low water absorption
2.High strength, high wear resistance
3.High acid resistance
4.Not easy to oxidize
5.Not easy to be contaminated by media
$High Alumina Refractory Bricks$

High Alumina Refractory Bricks

High Alumina Refractory Bricks
High alumina refractory bricks are classified according to their mineral composition: low mullite, mullite, mullite-corundum, corundum-mullite and corundum. Their mineral compositions are mainly corundum, mullite and glass phases
Fire clay Brick

Fire clay Brick
Local materials

Cheap，durable

Fireproof, heat insulation

Sound insulation

Moisture absorption

1 2 3 4 5 next last

Home Whatsapp Mail Message

TOP